Tuesday, May 17, 2022

VENTILATION OUTAGE - SOUTH RAL - JUNE 7TH FROM 6:00AM TO 10:00AM

TO ALL IN SOUTH RAL:

F&S will be conducting a VENTILATION OUTAGE affecting the listed rooms on the ground and 1st floors of South RAL on Tuesday, June 7th from 6:00AM to 10:00AM. This outage is needed to service the fans and clean the coils associated with the system. During this outage, there will be no supply air available, exhaust to the fume hoods, or general exhaust. As a result, no experiments should be running in the fume hoods during the outage and the affected rooms should be unoccupied. To prepare for the outage:

  • Make sure all fume hood sashes are closed
  • Make sure all chemicals and waste containers are sealed

Further details about the outage are listed below:

Outage Request Number: 62416

Outage Time : 2022/06/07 06:00 until 2022/06/07 10:00

Outage Type : VENTILATION

Building : 0116 - ROGER ADAMS LABORATORY

Building Sections affected : 36,37,38,49,49B,50,53,53B,53C,56,72,75,76,77,79,79C,136,137,148,149,149B,151,153,172,173,177,179,272,273,273B,275,276,472,473,476,477&478

Building Services affected : Supply air and Exhaust serving listed areas.

Building Occupants Effect : There will be NO Supply air or Fume Hood exhaust. The general exhaust will be down also.

Ventilation Fan No. : AHUS-3 & ERU-104

Ventilation Area. : See rooms listed below

Comments : We would also like to have Steam Dist replace the OA filter during this outage also. We will coordinate with them.

Reason : To service fans and replace filters associated with system.

If you have any further questions or concerns, please do not hesitate to email the SCS Facilities and Safety team at scs-facilities@mx.uillinois.edu. This information will also be available for viewing on the SCS Building Outages/Important Notices blog: www.scsbuildingoutages.blogspot.com.

 

Shane Brownfield, CCHO

Safety/Environmental Compliance Coordinator– School of Chemical Sciences

94 Roger Adams Lab

217-300-6618

sbrownfi@illinois.edu

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.