TO ALL IN SCS:
F&S will be conducting an EMERGENCY VENTILATION OUTAGE affecting the 2nd-4th floors of South RAL (rooms x33-x79) from Wednesday, August 9th at 6:00AM to Monday, August 14th at 5:00PM. This outage is needed to replace the heat recovery wheels on the listed ventilation fans. During this outage, there will be no conditioned air or exhaust air present in the affected areas so nobody should be working on the affected floors. To prepare for the outage, please make sure that all fume hood sashes are closed and all chemical/waste containers are sealed. There will be elevated temperatures and higher than usual humidity so make sure to protect any materials or equipment that may be sensitive to these conditions. Further details about the outage are listed below:
Facilities and Services will be performing an (EMERGENCY)outage on
VENTILATION at ROGER ADAMS LABORATORY (0116) from Wed 2023/08/09 06:00 to Mon 2023/08/14 17:00 - (EMERGENCY)
Ventilation Fan No. : DOA-101&102
Ventilation Area. : 2nd,3rd & 4th floor labs, South RAL
Outage ID : 71513
Outage Reason : F&S will be performing energy recovery wheel replacements in both of the units listed above. This is a critical project for all parties relying on this equipment.
Building Sections affected : 2nd-4th Floors South RAL
Building Services affected : There will be NO conditioned air or exhaust air to these spaces.
Building Occupants Effect : Elevated temperatures,no air movement with higher humidity levels in these rooms.
Comments : Please cap all chemicals contained in fume hoods and close fume hood sash doors in these locations.
If you have any further questions or concerns, please do not hesitate to email the SCS Facilities and Safety team at scs-facilities@mx.uillinois.edu. This information will also be available for viewing on the SCS Building Outages/Important Notices blog: www.scsbuildingoutages.blogspot.com
Shane Brownfield, CCHO
Safety and Inventory Coordinator– School of Chemical Sciences
94 Roger Adams Lab
217-300-6618
sbrownfi@illinois.edu
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.