Monday, November 14, 2022

VENTILATION OUTAGE - SOUTH RAL - NOVEMBER 16TH FROM 8:00AM TO 10:00AM

TO ALL IN SOUTH RAL:

F&S will be conducting a VENTILATION OUTAGE affecting the 2nd, 3rd, and 4th floors of South RAL on Wednesday, November 16th from 8:00AM to 10:00AM. This outage is needed to measure energy wheels for possible replacement project. Please note that this outage will only affect the supply air to the affected areas. Exhaust will still be available so research can continue as usual. In order to compensate for the loss of supply air, please keep the doors open to any labs where the fume hoods are in use. The affected rooms are as follows:

  • 233-279

  • 333-379

  • 433-479

Further details about the outage are listed below:

Approved Outage Details:

Outage Request Number: 67819

Outage Time : 2022/11/16 08:00 until 2022/11/16 10:00

Outage Type : VENTILATION

Building : 0116 - ROGER ADAMS LABORATORY

Building Sections affected : 2nd, 3rd,4th Floors South Labs (Make up air)

Building Services affected : We will have the supply air off intermittently. Possibly both units, 101 & 102

Building Occupants Effect : Reduction in supply air.(Make up air) for a short amount of time. 15-30 minutes during the listed outage time.

Ventilation Fan No. : SFs-101 & SFs-102

Ventilation Area. : 2nd, 3rd,4th Floors South Labs (Make up air)

Comments : Please leave doors to labs open during this time to allow for loss of make up air to fume hoods. Fume Hoods can be used. This only affects the supply air.

Reason : To measure energy wheels for possible replacement project.

If you have any further questions or concerns, please do not hesitate to email the SCS Facilities and Safety team at scs-facilities@mx.uillinois.edu. This information will also be available for viewing on the SCS Building Outages/Important Notices blog: www.scsbuildingoutages.blogspot.com.

 

Shane Brownfield, CCHO

Safety/Environmental Compliance Coordinator– School of Chemical Sciences

94 Roger Adams Lab

217-300-6618

sbrownfi@illinois.edu

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.