TO ALL IN CLSL-A:
F&S will be conducting a VENTILATION OUTAGE affecting CLSL-A on Wednesday, July 7th from 5:00AM to 1:00PM. This outage is needed to install a new exhaust fan motor as part of the ongoing ESCO project renovations. Fume hood exhaust may not be sufficient for safe use so no experiments should take place in the fume hoods during the outage. To prepare for the outage, please do the following:
- Make sure all chemicals and waste containers are capped
- Make sure all fume hood sashes are lowered
Further details about the outage are listed below:
Outage Request Number: 52578
Outage Time : 2021/07/07 05:00 until 2021/07/07 13:00
Outage Type : VENTILATION
Building : 0070 - CHEMICAL & LIFE SCIENCES LABORATORY
Building Sections affected : Whole Building
Building Services affected : Fume Hood Exhaust
Building Occupants Effect : Fume hoods will continue to exhaust air but may not exhaust enough air for occupants to work safely within the hoods.
Ventilation Fan No. : EF-2
Ventilation Area. : CLSL A
Comments : Starting at 5:00a.m. to minimize lab down time in building. Requesting 8 hours but expecting work to take 6 hours. Schneider will notify departments once fans are fully operational again.
Shutoff Location : NOT APPLICABLE
Reason : Installing a new variable speed motor for exhaust fan. This work is part of U16061 EPC Proj 005.
If you have any further questions or concerns, please do not hesitate to email the SCS Facilities and Safety team at firstname.lastname@example.org. This information will also be available for viewing on the SCS Building Outages/Important Notices blog: www.scsbuildingoutages.blogspot.com.
Safety/Environmental Compliance Specialist– School of Chemical Sciences
94 Roger Adams Lab
Post a Comment
Note: Only a member of this blog may post a comment.